In Internet Explorer go to the following Address

http://192.168.1.254

The following screen should appear once the address has been entered correctly:

Enter the User Name ‘admin’ and Password as ‘admin’.

Click OK

Once logged the main status screen should look like the following:

Click ‘Wizard Setup’.

Change ‘Encapsulation’ and ‘Multiplex’ to PPPoA and VC.

Click Next.

Enter the your E-Access username. This will be in the format of username@dsl.e-access.com.au

Enter your account password.

Click Next.

A screen will now appear as shown below giving you a brief overview of what information has been entered and is going to be saved to the flash component. By default, ‘Change LAN configuration’ shouldn’t be touched.

Click ‘Save Settings’

The following screen will now appear

Click Start Diagnose which will run through a variety of tests and take up to 20 seconds.

If all information was entered correctly you should see passes on the following:

• Test PPP/PPPoE server connection – Tests ability to login to the server.
• Ping Default Gateway – Pings the internet providers default gateway.

Click Return to Main Menu

Click Logout

From here switch off the modem and then back on again. Once the ADSL light is on constantly and PPP is lit up in the same manner you should be online and able to browse.